SecureBridge demo CRSSHIO failed
SecureBridge demo CRSSHIO failed
Hi.
I'm used Embarcadero 10.1 with unidac 6.4.16 and securebridge 7.3.4.
When i'm used unidac demo with SecureBridge, i'm have error CRSSHIOHandler - 'open failed'.
SSH connection work great, i'm can see connection.
MySQL configured by default(localhost 3306), from putty i can login on mysql.
Also im tried set Server Addres external api, don't help.
I'm used Embarcadero 10.1 with unidac 6.4.16 and securebridge 7.3.4.
When i'm used unidac demo with SecureBridge, i'm have error CRSSHIOHandler - 'open failed'.
SSH connection work great, i'm can see connection.
MySQL configured by default(localhost 3306), from putty i can login on mysql.
Also im tried set Server Addres external api, don't help.
Re: SecureBridge demo CRSSHIO failed
Unfortunately, we could not reproduce the issue. Please give a more detailed description of the problem: when exactly the error occurs, the exact error message, steps to reproduce, etc.
Re: SecureBridge demo CRSSHIO failed
MySQL server address is specified in the TUniConnection.Server property relatively to SSH server and there should be access from SSH server to MySQL server. If MySQL server is on the same machine where SSH server the TUniConnection.Server property should be set to "127.0.0.1" or "localhost" otherwise TUniConnection.Server should not include the value "127.0.0.1" or "localhost". MySQL server port is specified in the TUniConnection.Port property, but not SSH server port. Please, set the properties TUniConnection.Server (IP address of MySQL server) and TUniConnection.Port ( MySQL server port - by default - 3306) to the correct values and inform us about the result.
In our SSH demo sample, please set on the DB Connection panel, considering the above recommendations, the required values to connect to MySQL server and pre-connect to SSH server select "Direct SSH" and try to connect to MySQL server.
In our SSH demo sample, please set on the DB Connection panel, considering the above recommendations, the required values to connect to MySQL server and pre-connect to SSH server select "Direct SSH" and try to connect to MySQL server.
Re: SecureBridge demo CRSSHIO failed
Try to specify public IP address of MySQL server. Also, please specify whether SSH server and MySQL server are located on the same machine or different?
Re: SecureBridge demo CRSSHIO failed
public ip dont work.
I'n don't have information about location mysql, but from ssh i can connect throw mysql.
I'n don't have information about location mysql, but from ssh i can connect throw mysql.
Re: SecureBridge demo CRSSHIO failed
Please, provide a screenshot of the port forwarding settings in PUTTY.
Re: SecureBridge demo CRSSHIO failed
Please provide information (ip and port of MySQL server) which you are using with putty.
Re: SecureBridge demo CRSSHIO failed
I'm used 127.0.0.1:3306 mysql from ssh console.
Re: SecureBridge demo CRSSHIO failed
Please set the "Listen Port" to 3306, select "LocalPortForwarding" and try to connect to MySQL server.
-
- Posts: 7
- Joined: Wed 16 Dec 2020 13:10
Re: SecureBridge demo CRSSHIO failed
I had exactly the same problem.
I discovered that port forwarding was disabled for SSH by the ISP.
I discovered that port forwarding was disabled for SSH by the ISP.
Re: SecureBridge demo CRSSHIO failed
Yes, if the ISP disabled port forwarding, you'll get this error.
-
- Posts: 3
- Joined: Wed 03 Feb 2021 15:06
- Location: Atlanta, GA, USA
- Contact:
Re: SecureBridge demo CRSSHIO failed
stuartclennett wrote: ↑Fri 18 Dec 2020 15:15 I had exactly the same problem.
I discovered that port forwarding was disabled for SSH by the ISP.
Ask your ISP (consult their T&Cs etc)
Run a simple service (e.g. echo service) on that port and try connecting with telnet client or netcat. SSH is more complex to diagnose, so start with something simple.