dbForge и OpenSSH 6

Обсуждение возникших проблем, предложений и ошибок dbForge для MySQL
Закрыто
VladimirP
Сообщения: 3
Зарегистрирован: Ср 07 авг 2013 16:31

dbForge и OpenSSH 6

Сообщение VladimirP » Ср 07 авг 2013 16:47

Есть две машины.
Первая: FreeBSD 9.1-STABLE FreeBSD 9.1-STABLE #1 r252094 с OpenSSH_6.2p2, OpenSSL 0.9.8y 5 Feb 2013
Вторая : FreeBSD 9.0-RELEASE-p5 FreeBSD 9.0-RELEASE-p5 с OpenSSH_5.8p2_hpn13v11 FreeBSD-20110503, OpenSSL 0.9.8q 2 Dec 2010

Конфиги на обоих идентичны. На первую не заходит User authentication failed, на вторую без проблем. Продукты конкурентов везде работают без проблем. Где что подкрутить можно ?
Последний раз редактировалось VladimirP Чт 08 авг 2013 12:11, всего редактировалось 1 раз.

Viktor
Devart Team
Сообщения: 100
Зарегистрирован: Чт 06 май 2010 08:13

Re: dbForge и OpenSSH 6

Сообщение Viktor » Ср 07 авг 2013 17:58

Покажите sshd_config файл с первой машины. Попробуйте также установить/снять чекбокс "интерактивный режим" в свойствах соединения.

VladimirP
Сообщения: 3
Зарегистрирован: Ср 07 авг 2013 16:31

Re: dbForge и OpenSSH 6

Сообщение VladimirP » Ср 07 авг 2013 18:56

Чекбоксы снимал/убирал
Конфиги на обоих машинах идентичны. Сравнивались diffом.

Код: Выделить всё

#	$OpenBSD: sshd_config,v 1.82 2010/09/06 17:10:19 naddy Exp $
#	$FreeBSD: release/9.0.0/crypto/openssh/sshd_config 224638 2011-08-03 19:14:22Z brooks $

# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.

# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin

# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options change a
# default value.

# Note that some of FreeBSD's defaults differ from OpenBSD's, and
# FreeBSD has a few additional options.

#VersionAddendum FreeBSD-20110503

Port 32122
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::

# The default requires explicit activation of protocol 1
#Protocol 2

# HostKey for protocol version 1
#HostKey /etc/ssh/ssh_host_key
# HostKeys for protocol version 2
#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_dsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key

# Lifetime and size of ephemeral version 1 server key
#KeyRegenerationInterval 1h
#ServerKeyBits 1024

# Logging
# obsoletes QuietMode and FascistLogging
#SyslogFacility AUTH
#LogLevel INFO

# Authentication:

#LoginGraceTime 2m
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10

#RSAAuthentication yes
#PubkeyAuthentication yes
#AuthorizedKeysFile	.ssh/authorized_keys

# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#RhostsRSAAuthentication no
# similar for protocol version 2
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# RhostsRSAAuthentication and HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes

# Change to yes to enable built-in password authentication.
#PasswordAuthentication no
#PermitEmptyPasswords no

# Change to no to disable PAM authentication
#ChallengeResponseAuthentication yes

# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no

# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes

# Set this to 'no' to disable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will 
# be allowed through the ChallengeResponseAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via ChallengeResponseAuthentication may bypass
# the setting of "PermitRootLogin without-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and ChallengeResponseAuthentication to 'no'.
#UsePAM yes

#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
#X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
PrintMotd yes
#PrintLastLog yes
#TCPKeepAlive yes
#UseLogin no
#UsePrivilegeSeparation yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
UseDNS no
#PidFile /var/run/sshd.pid
#MaxStartups 10
#PermitTunnel no
#ChrootDirectory none

# no default banner path
#Banner none

# override default of no subsystems
Subsystem	sftp	/usr/libexec/sftp-server

# Disable HPN tuning improvements.
#HPNDisabled no

# Buffer size for HPN to non-HPN connections.
#HPNBufferSize 2048

# TCP receive socket buffer polling for HPN.  Disable on non autotuning kernels.
#TcpRcvBufPoll yes

# Allow the use of the NONE cipher.
#NoneEnabled no

# Example of overriding settings on a per-user basis
#Match User anoncvs
#	X11Forwarding no
#	AllowTcpForwarding no
#	ForceCommand cvs server

Viktor
Devart Team
Сообщения: 100
Зарегистрирован: Чт 06 май 2010 08:13

Re: dbForge и OpenSSH 6

Сообщение Viktor » Пт 09 авг 2013 10:34

Нам не удалось воспроизвести проблему на нашем тестовом сервере.
Попробуйте установить в sshd_config:

Код: Выделить всё

AllowTcpForwarding yes 
PasswordAuthentication yes

VladimirP
Сообщения: 3
Зарегистрирован: Ср 07 авг 2013 16:31

Re: dbForge и OpenSSH 6

Сообщение VladimirP » Пт 09 авг 2013 13:53

"PasswordAuthentication yes" вместе с убранной галкой "Интерактивный режим" решили проблему. Спасибо

Закрыто